Photo: cookeryonline.com
Meat Dishes
Slow-Roast Pork Shoulder (Reverse Sear)
Recipe No. 0673
A reverse-sear pork shoulder: a skinless American pork butt (Boston butt — the upper shoulder), roasted low and uncovered to 82°C, rested, then given a short, very hot burst to brown the fat, with a cider gravy from the tin and optional crackling cooked separately.
- Serves 6
- Reverse sear
- About 90 min per kg at 150°C to 82°C, then 30–40 min rest and a 13–17 min hot finish
- 2 kg skinless pork butt (Boston butt)
- Crackling cooked separately
- Probe thermometer essential
Why we roast it this way
This is a reverse-sear shoulder: roasted low and uncovered until a probe in the centre reads 82°C, rested, then finished very hot so the outside browns and the fat turns crunchy. Carve straight away — there is no second rest. It is not the same method as our Roast Pork with Crackling, or the pork row on Roasting Know How (a hot start, then 180°C (160°C fan) [350°F / gas 4], and a roast-through probe of 63–68°C). The crackling, if you want it, is cooked separately.
The portions control scales the gravy and flavourings, not the joint’s cooking time. Use the actual weight of the joint at about 90 minutes per kg, and finish by the probe.
Method
Before you start
- If you are making the crackling, start the day before: pat the skin very dry with kitchen paper and leave it uncovered in the fridge overnight. Score it at 1 cm intervals if it has not already been scored.
- Take the pork out of the fridge about 1 hour before cooking.
- Preheat the oven to 150°C (130°C fan) [300°F / gas 2].
- Have the roasting tin and probe thermometer ready, and enough chicken stock or water for about 1 cm (½ inch) in the tin.
If you are making the crackling separately, start the day before: pat the skin very dry with kitchen paper and leave it uncovered in the fridge overnight. If it has not been scored, score it at 1 cm intervals with a very sharp knife or clean craft knife, cutting through the skin and fat but not so deep that you would have cut into the meat.
Take the pork (2 kg) out of the fridge about 1 hour before cooking. Heat the oven to 150°C (130°C fan) [300°F / gas 2].
Season the joint all over with sea salt flakes and black pepper, and rub it with the olive oil (1 tbsp). Sit it in a roasting tin and pour in the chicken stock or water (500 ml), enough for a depth of about 1 cm (½ inch).
Roast, uncovered, at 150°C (130°C fan) [300°F / gas 2] for about 90 minutes per kg, until a probe in the centre reads 82°C. For a 2 kg joint that is about 3 hours; the clock is only a guide, so go by the probe. Top up the stock or water as it evaporates, so there is always about 1 cm in the tin and the sediment does not burn.
Lift the pork onto a board and rest it, uncovered, for 30–40 minutes. Keep the tin and its juices for the gravy. This rest, and the reverse sear that follows, is a good window in which to finish the crackling, if you have not already started it.
For the crackling, rub the dried skin with the oil (1 tbsp) and the salt (2 tsp), pushing it into the score lines, and the fennel seeds (2 tsp) if you are using them. Roast it on a tray at 240°C (220°C fan) [475°F / gas 9] until the skin has blistered and turned crisp, watching it closely towards the end. Time it so it is ready when you carve.
For the gravy, tilt the tin and skim off most of the fat, leaving the browned juices in the tin. Set the tin over a medium heat, stir in the flour (1 tbsp) to make a roux and cook for a minute or two until it turns golden. Gradually stir in the cider (200 ml) and let it bubble for a couple of minutes, then add the tin juices and simmer for 5–10 minutes, until cooked out and the gravy coats the back of a spoon. Strain, taste and season.
Reverse sear: heat the oven to 245°C (225°C fan) [475°F / gas 9]. Return the pork to a hot tin and roast for 13–17 minutes, until it is browned and the fat is crunchy.
Carve straight away — there is no second rest — and serve with the gravy, the crackling if you made it, roast potatoes and greens.
Rate this recipe
Tried it? Rate it.
The readers’ average appears here once 5 readers have rated it.
One vote per recipe per browser, and you can change it. We keep only the stars: no name, e-mail or IP address. How ratings work
See also
Chef’s notes
- The joint is an American pork butt, also called a Boston butt: the upper shoulder, well marbled and forgiving, and the same muscle group we roast as a shoulder. Despite the name, it is not from the rear of the pig. UK butchers most often sell this as a spare rib joint (that is the blade end of the shoulder, not American spare ribs) or as collar; some will also call it the neck end. Those UK names overlap a little from shop to shop — collar is sometimes a smaller, boneless trim nearer the neck — so if you are unsure, ask for the upper shoulder, skin off. It is not the lower picnic, which UK butchers call the hand and spring.
- This is a reverse-sear roast: a long, uncovered cook at a low heat to 82°C in the centre, a 30–40 minute rest, then a short, very hot burst to brown the meat and make the fat crunchy. Carve straight away; there is no second rest. Our Roasting Know How pork row is a different method (a hot start, then 180°C (160°C fan) [350°F / gas 4], and a roast-through probe of 63–68°C, about 45 minutes per kg). Do not mix the two charts.
- This reverse-sear method follows Cook the Story's How to Roast Pork Perfectly, itself based on Serious Eats' reverse sear.
- The crackling is made separately, using the same dry-overnight, score and hot-roast treatment as our Roast Pork with Crackling. Ask the butcher to take the skin off the joint and give it to you, or buy a piece of pork skin. Time it to come out when you carve; the joint's rest and reverse sear give you a good 45–55 minutes, or start it earlier if the skin needs longer.
- Leftovers (UK FSA): carve remaining meat into small portions promptly; cool quickly and refrigerate within 2 hours, counting resting and serving time too. Eat within 48 hours, or freeze in labelled portions. Reheat only once, until steaming hot all the way through.
Safety guidance: FSA cooking food safely and FSA cooking and leftovers.
Weight and timing guide
This is a reverse-sear timing, not the pork row on our roasting page. Roast uncovered at 150°C (130°C fan) [300°F / gas 2] for about 90 minutes per kg, until a probe in the centre reads 82°C. Rest 30–40 minutes, then reverse sear at 245°C (225°C fan) [475°F / gas 9] for 13–17 minutes, and carve straight away. The 2 kg line is the one given for this recipe; other weights simply follow 90 minutes per kg to 82°C.
| Weight | Serves (guide) | Low roast to 82°C | Rest | Reverse sear |
|---|---|---|---|---|
| 1.5 kg | 4–5 | about 2¼ hrs | 30–40 min | 13–17 min |
| 2 kg | 6 | about 3 hrs | 30–40 min | 13–17 min |
| 2.5 kg | 7–8 | about 3¾ hrs | 30–40 min | 13–17 min |
A shoulder by another name
A pork butt, or Boston butt, is the upper part of the shoulder: well marbled, patient in a low oven, and a favourite for a slow roast or a barbecue. In Britain the same cut is most often sold as a spare rib joint or as collar. Cooked this way it is taken gently to the centre temperature, rested, then finished very hot so the outside browns and the fat turns crunchy, with crackling made on the side if you want it.
How this recipe was developed
This is a reverse-sear pork shoulder. The crackling, cooked separately, follows the dry-overnight, score and hot-roast treatment from our Roast Pork with Crackling (0308). The gravy is the site's flour-thickened method, with cider as on that same page, and no butter.
- Reverse sear. The low, uncovered roast to 82°C, the 30–40 minute rest, the shallow stock in the tin, and the short 245°C finish with no second rest follow Cook the Story's How to Roast Pork Perfectly, itself based on Serious Eats' reverse sear. The wording here is our own.
- Not the site's pork chart, and not a skin-on hot-start shoulder. Roast Pork with Crackling, and the pork row on our roasting page, use a hot start and a 63–68°C finish for a loin (the belly note on 0308 is also a different timing).
