Kitchen tools · buying guide
Forks, Skewers & Needles
Carving forks, skewers, trussing and larding needles: for holding, testing, threading and trussing.
Tool photos link to similar products on Amazon (affiliate links). As an Amazon Associate I earn from qualifying purchases.
Forks, Skewers & Needles
For holding, testing, threading and trussing.
IllustrationShop similar two-pronged fork on Amazon (opens in a new tab)Two-pronged fork
A long cook’s fork for lifting and turning joints, holding meat steady while you carve and testing whether vegetables are tender. A carving fork has two prongs and a guard to protect your hand.
- Buying
- Choose a sturdy fork with a firm handle that matches your carving knife; a guard if you carve with it.
- Using
- Hold the joint with the back of the fork where you can, rather than stabbing it repeatedly, so the juices stay in.
Skewers
Thin metal or wooden spikes for kebabs and for holding food together while it cooks; small ones close the cavity of stuffed poultry or a stuffed joint. A thin skewer is also the classic cake test: push it into the centre, and if it comes out clean, the cake is done. Thin bamboo skewers are used a lot in Asian cooking.
- Buying
- Flat metal skewers stop food spinning round when you turn them. For meat, poultry and terrines, a digital probe thermometer is a more reliable test of doneness than a skewer.
- Using
- Soak wooden skewers in water for about 30 minutes before grilling so they do not burn, and leave small gaps between the pieces so the heat gets round them.
Trussing needle
A large needle with a big eye, used with kitchen string to truss poultry and to sew up stuffed or rolled joints. Different sizes and designs are available.
- Buying
- Choose a needle with an eye big enough for the string you use.
- Using
- Leave long ends on the string so the trussing is easy to find and pull out before carving.
Dipping fork
Long, thin tines, or a small loop, for dipping truffles, fruit or nuts in melted chocolate or sugar and lifting them out to drain. You can make your own by bending a small loop into the end of a piece of stiff wire.
- Buying
- Sold singly or in sets with different heads (loop, two prongs, spiral).
- Using
- Tap the fork on the edge of the bowl to shake off the excess before you set the sweet down on baking paper.
Larding needle
There are two main types. One is long and pointed with a channelled shaft and a handle, and carries strips of fat or ham deep into lean meat. The other, the pique needle, is smaller with a split end, and stitches short strips of fat into the surface of the meat so it does not dry out, especially when braising.
- Buying
- Stainless steel, with a smooth channel or clip that holds the fat firmly.
- Using
- Chill the strips of fat first; they are much easier to thread when cold and firm.
Rewritten and updated 1 November 2026. Products checked on Amazon.co.uk on 1 November 2026.

